KOZI Model 100 Pellet Insert
ENJOY THE COMFORT AND RELIABILITY OF A KOZI PELLET BURNER
Designed to generate heat using waste wood by-product pellets, the KOZI Model 100 is a highly efficient, environmentally-friendly, economically priced unit. KOZI Pellet appliances are considered "clean burning" as they produce low environmental emissions and ash content.
As a primary or supplemental heat source, KOZI Pellet inserts produce a large amount of heat while requiring little maintenance. Our products have been designed to meet the most stringent and rigid safety specifications in order to last a lifetime.
The state-of-the-art MX Controller acts as a trouble-shooting guide. At a glance, this diagnostic system. will relay the operating status of your unit to ensure your safety and peace of mind.
Wall-thermostat capable, standard air-ignition system, and our patient air wash screen saver guarantees that you will have the most up-to-date product on the market today!
The KOZI Model 100 Pellet Stove is ideal for stand alone installations while the KOZI Pellet Insert is designed to fit into an existing fireplace. Standard and oversized surround kits are available to accommodate most fireplace openings.
The Power Venting System eliminates any chances of back draft. The flexibility of burning either outside or room air allows for custom operation to suit any application. A convenient side mounted MX controller allows the owner to manually adjust the fuel feed rate and fan speed to suit individual needs for temperature control.
An attractive matte black finish will accent the decor of any home. The KOZI Pellet inserts are warranted against poor workmanship and defective materials
MX Digital Control Board Features:
3 standard operational modes "Manual", "Hi-Low" and "Auto"
Wall Thermostat capable
Adjustable fuel feed from 1 lb to 4.5 lbs per hour (454 grams to 2 kgs)
Simple fully automatic push button start-up system
Automatic safety shut-off when the unit runs out of fuel
Automatic shut down in the event of any system malfunction
Heat exchanger blower senses amount of heat and adjusts blower speed accordingly
Simplified control circuit is easy to maintain and inexpensive to repair
A unique diagnostic light module makes it easy to monitor system functions
10 tube heat exchanger
Advanced glass saver door screen - reduces cleaning frequency
40 lb. (18 kg) feed hopper
Large capacity and removable ash reservoir reduces cleaning frequency
Top loading fuel feeding system separates the burn chamber from the fuel storage compartment thus reducing the risk of any "burn-back"
Negative pressure burn chamber prevents spillage of smoke and fumes into the house
Manual draft control allows easy adjustment for various fuel and draft conditions
Variable speed heat exchanger blower
Unique "bouncing flame" heater design
Effective air wash system keeps glass door clean longer
Tested and Certified for safety, efficiency, and performance by Warnock Hersey
Certified for residential and mobile home installations in Canada and the U.S.A.
Insert models Certified for masonry insert and factory built zero-clearance fireplace installation
All visible corners and edges are finished to reinforce safety and accent appearance
Heavy duty, full hearth extension
Matte black heavy cast iron door
"cool grip coil" door handle
Ceramic safety glass rated For 1400 ° F (760 °C)
Full width interior ash lip to reduce spillage when the door is opened
Aluminized steel interior heat shield and stainless steel burn pot resists heat and corrosion
Scraper-type heat exchanger cleaner and removable top heat shield
WIDTH 25" / 625 mm 25" / 625 mm
HEIGHT 31" / 775 mm 23" / 585 mm
DEPTH 25" / 625 mm 25" / 625 mm
WEIGHT 225 lb. / 103 kg 200 lb. / 90 kg
FUEL CAPACITY 50 lb. / 22 kg 40 lb. / 18 kg
MOBILE HOME APPROVED APPROVED
BURN TIME 11 to 50 hours 9 to 40 hours
INPUT/HR* 40,000 BTU 40,000 BTU
FLUE DIAMETER 3" / 75 mm 3" / 75 mm
*INPUT MAY VARY WITH THE QUALITY OF FUEL
WIDTH MIN 23" MAX 40"
HEIGHT MIN 19.5" MAX 31"
DEPTH MIN 16"
HEARTH REQUIREMENT MIN 11"
CLEARANCES TO COMBUSTIBLES
TO BACKWALL 1" / 25 mm
TO CORNERS 1" / 25 mm
TO SIDEWALL (BAYWIN) 12" / 300 mm
TO SIDEWALL (XL) 5" / 125 mm
TO MANTLE 13" / 330 mm
ALCOVE MAX. DEPTH 30" / 762 mm
ALCOVE MIN. WIDTH 48" / 1220 mm
ALCOVE MIN. HEIGHT 48" / 1220 mm
FLOOR PROTECTOR 6" / 150 mm
ELECTRICAL REQUIREMENT 115 Volt / 3 amp
WITH SELF IGNITER 115 Volt / 6 amp
EPA STATUS EXEMPT
TESTING AND LISTED BY WARNOCK HERSEY
Add this product to your cart below
under 'ordering options'.