KOZI BayWin Pellet Stove
Highly efficient, environmentally friendly, and competitively priced, the KOZI Model BayWin Pellet Burner is the most popular alternative heating source on the market today.
Loaded with state-of-the-art features, this pellet burner will provide many years of trouble free heating comfort. The attractive design guarantees it will fit into any decor.
Each appliance is equipped with many safety features such as; Circulation Fan Override Switch, High Temperature Sensors, and an Exhaust Sensor. Our MX Control Light Module Monitoring System, standard on all pellet stoves, acts as a trouble shooting guide. At a glance, this diagnostic system will relay the operating status of your unit to ensure your safety and peace of mind.
The KOZI BayWin Pellet Burner is available as a freestanding stove or a fireplace insert.
The Electric Start Kit is standard on all KOZI model BayWin Pellet Stoves
MX Digital Control Board Features:
3 standard operational modes "Manual", "Hi-Low" and "Auto"
Wall Thermostat capable
Adjustable fuel feed from 1 lb to 4.5 lbs per hour (454 grams to 2 kgs)
Simple fully automatic push button start-up system
Automatic safety shut-off when the unit runs out of fuel
Automatic shut down in the event of any system malfunction
Heat exchanger blower senses amount of heat and adjusts blower speed accordingly
Simplified control circuit is easy to maintain and inexpensive to repair
A unique diagnostic light module makes it easy to monitor system functions
10 tube heat exchanger
Advanced glass saver door screen - reduces cleaning frequency
50 lb. (22 kg) feed hopper easily converts to a 100 lb. (45.5 kg) capacity with the optional hopper extension (Available on freestanding units only)
Large capacity and removable ash reservoir reduces cleaning frequency (Available on freestanding units only)
Top loading fuel feeding system separates the burn chamber from the fuel storage compartment thus reducing the risk of any "burn-back"
Negative pressure burn chamber prevents spillage of smoke and fumes into the house
Manual draft control allows easy adjustment for various fuel and draft conditions
Variable speed heat exchanger blower
Unique "bouncing flame" heater design
Effective air wash system keeps glass door clean longer
Tested and Certified for safety, efficiency, and performance by Warnock Hersey
Certified for residential and mobile home installations in Canada and the U.S.A.
Insert models Certified for masonry insert and factory built zero-clearance fireplace installation
All visible corners and edges are finished to reinforce safety and accent appearance of the unit
Heavy duty, full hearth extension
Heavy block door
Ceramic safety glass rated For 1400 ° F (760 °C)
Full width interior ash lip to reduce spillage when the door is opened
Aluminized steel interior heat shield and stainless steel burn pot resists heat and corrosion
Scraper-type heat exchanger cleaner and removable top heat shield
WIDTH 25" / 625 mm 25" / 625 mm
DEPTH 25" / 625 mm 25" / 625 mm
HEIGHT 31" / 775 mm 23" / 585 mm
WEIGHT 225 lb. / 103 kg 200 lb. / 90 kg
FUEL CAPACITY 50 lb. / 22 kg 40 lb. / 18 kg
MOBILE HOME APPROVED APPROVED
BURN TIME 11 to 50 hours 9 to 40 hours
INPUT/HR* 40,000 BTU 40,000 BTU
FLUE DIAMETER 3" / 75 mm 3" / 75 mm
*INPUT MAY VARY WITH THE QUALITY OF FUEL
Fireplace Opening Requirements:
WIDTH MIN 23" MAX 40"
HEIGHT MIN 19.5" MAX 31"
DEPTH MIN 16"
HEARTH REQUIREMENT MIN 11"
CLEARANCE TO COMBUSTIBLES
TO BACKWALL 1" / 25 mm
TO CORNERS 1" / 25 mm
TO SIDEWALL (BAYWIN) 12" / 300 mm
TO SIDEWALL (XL) 5" / 125 mm
TO MANTLE 13" / 330 mm
ALCOVE MAX. DEPTH 30" / 762 mm
ALCOVE MIN. WIDTH 48" / 1220 mm
ALCOVE MIN. HEIGHT 48" / 1220 mm
FLOOR PROTECTOR 6" / 150 mm
ELECTRICAL REQUIREMENT 115 Volt / 3 amp
WITH SELF IGNITER 115 Volt / 6 amp
EPA STATUS EXEMPT
TESTING AND LISTED BY WARNOCK HERSEY
Add this product to your cart below
under 'ordering options'.